Cockroach gel syringe

Name:High quality biological cockroach killing bait gel syringe

Capacity:8ml,10ml,13ml

Sizes:look at the follow detials

Material:PE

Cap:tip caps

Certificate:CE,SGS,DMF,ISO9001:2008

Xinfudaplastic has ranges of disposable paste syringes. These syringes are with reliably sealing and uniform thickness, which are good for stability of solution. They will also not be contaminated during accurately injecting. Thick mark will help you set the dosage correctly. 

Direction of use：

• Cow mastitis syringe

• Goat and sheep wormer syringe

• Oral paste syringe for horse

• Feeding syringe for calves to supplement

• Insecticide gel syringe

Feature:

• Narrow and wide tip

• Partial and full insertion

• Various colors

• GMP standard production

• EO sterilization

Defects of plastic veterinary syringe

Talk about the common defects of plastic veterinary syringe.

cockroach gel syringe

Vacuum voids / air pockets,Vacuum voids are pockets of air trapped within or close to the surface of an injection molded prototype.Vacuum voids are often caused by uneven solidification between the surface and the inner sections of the prototype.

Warping,Warping is deformation that can occur in injection molded products when different parts of a component shrink unevenly.plastic materials can warp during the cooling process when uneven shrinkage puts undue stress on different areas of the molded part. This undue stress results in bending or twisting of the finished part as it cools.

horse syringe

Burn marks,Burn marks generally appear as black or rust-colored discoloration on an edge or surface of a molded plastic part.

Weld Lines,Weld lines is discoloured line where two flow fronts meet.Weld lines are caused by the inadequate bonding of two or more flow fronts when there is partial solidification of the molten plastic.

Cracks,the syringe surface has crazing,the cracks are cause by improper fusion of two fluid flows

Flow Lines,Flow lines are streaks, patterns, or lines.The flow lines are caused by the varying speed at which the molten plastic flows as it changes direction through the contours and bends inside the mold tool.

Notice on the emergency listing of disinfectants during the prevention and control of the new pneumonia epidemic

The current situation of pneumonia infected by the new coronavirus is severe, and the supply of disinfectants is tight in some areas. In order to ensure the effective supply of disinfectants throughout the country, the relevant matters are hereby notified as follows:

Alcohol disinfectants urgently marketed can be sold and used after passing the test (or entrusted test) by the product liability unit. The concentration of alcohol active ingredients in alcohol hand disinfectants is >60% (V/V).

Chlorine-containing disinfectants, chlorine dioxide disinfectants and peroxyacetic acid disinfectants that are urgently marketed may be marketed for use after the product responsibility unit tests (or enlists tests) the content of active ingredients and the pH meet the relevant hygiene standards. The effective period of disinfectant is 3 months (except those with stability test report).

For disinfectants that have been put on record and put on the market, if the product responsible unit increases the production line, production workshop or production site due to the expansion of its production scale, the product responsible unit may put the disinfectant on the market for use after it has tested (or commissioned to test) the content of the effective ingredients and pH of the disinfectant in accordance with relevant hygiene standards.

Xinfuda donate to fight coronavirs

On February 17, 2020, Ms. Yue Changfang, the general manager of Xinfuda, led a team of Xinfuda people to send disinfectants to Zhaoxian Health and Health Bureau and the first-line epidemic prevention checkpoints to help fight the epidemic with practical actions. Director Zheng Li of Zhao County Health and Health Bureau and frontline epidemic prevention cadres expressed their gratitude to Xinfuda

for sending charcoal in the snow.

manufacturing of intramammary syringe

Syringe injectors to be filled with preparations against mastitis.
Intramammary syringes are manufactured on modern equipment and do not differ from analogues of European manufacturers neither in parameters nor in quality.
The cannula of a syringe is very elastic and does not injure the teats of the udder. The cap of a syringe seals the nozzle of the flask and the piston perfectly sits in the flask body leaving no chance to leakage of the substance. The piston of a syringe ideally slides inside the flask due to the use of special polymer additives approved for contact with food, plastic plunger allows more smooth injections.

5ml syringe for cow mastitis

According to the feature of intramammary syringe, we can use syringe more friendly and conveniently. And Xinfuda as manufacturing of plastic syringe factory, we can offer 5ml, 8ml, 10ml, 13ml sizes for you.

Number of bacteria in dairy cows with breast cancer

Number of bacteria in dairy cows with breast cancer:
1. From the pollution inside the breast
Because cows with recessive mastitis have no clinical symptoms and the milk looks normal, it is often easy to be ignored and the milk of such cows is mixed into the cold tank. If the clinical mastitis is not completely treated, that is, although the clinical symptoms disappear, the bacterial cure rate does not reach 100%, and the remaining pathogens are mixed into the large tank milk by milking.

Cow mastitis syringe 

syringe for cow mastitis
2. Pollution from the breeding environment
In the pasture barn, many environmental pathogens such as litter, sink, feces and soil will have contact with the cow's breasts, resulting in a large number of microbes attached to the breast, so if the milking cup is not used before the correct method Thorough medicated bath, cleaning and disinfection around the nipple, around the breast, and other parts of the body of the cow will result in the retention of contaminants such as dirt and feces around the breast and in the nipple tube, and eventually the bacteria will be mixed into the large tank milk by milking.


plastic syringe
3. From milking equipment
Whether the milking equipment, including the milk cup, the milk tube, the milk storage tank, etc., has regular thorough disinfection has a great influence on the microbial content in the raw milk. For example, for an automatic milking production line, the number of microorganisms will increase sharply after the milking cup is squeezed, and the cup will fall during the operation. At this time, the cup is easily contaminated with the hind legs of the cow. Contact with the material causes pollution, which in turn contaminates the milk. In addition, if the rubber lining, milk tube and rubber gasket and other rubber parts are not replaced in time, cracks will cause the growth of pathogenic microorganisms.

How to use syringe for equine paste?

Syringe for equine paste is popular in animals medicine, of course more and more different plastic syringes appear and different using way make users confuse. Following is the details of dial a dose syringe usage.

Dial a dose syringe 

Here’s a step-by-step breakdown of how to use syringe for your equine paste:

First, safely tie up your horse and make sure his mouth doesn’t contain any feed, which may cause him to spit out the wormer.

Second, turn the knurled ring on the syringe’s plunger 1/4 turn to the left and slide it to the appropriate prescribed weight marking. (Please note that the dial on some syringes requires you to only spin the dial to the left or right for the appropriate weight setting.)

Third, turn the ring 1/4 to the right to lock it in place.

Fourth, remove the cover from the syringe tip. Insert the tip at a 45-degree angle into the corner of your horse’s mouth, where there are no teeth.

Fifth, depress the plunger all the way in as you wiggle the syringe around the horse’s mouth, spreading the dose of paste across the back of his tongue. Make sure you don’t just deposit a single lump, which he can easily spit out.