Child proof containers wholesale

Childproof Caps that Keep Products and Kids Safe

Need a cap that protects young ones from easily accessing harmful contents in a container? These Child Resistant Caps (CRC) that can be used on either plastic or metal containers.Child resistant closures for metal containers are usually lined with a type of foil or liner that is compatible with metal containers. Cap styles are available as Pictorial, PDT or "Push Down & Turn", Chem Lock (outer protective tab), and Stolz (made for tin-plate containers with a senior-friendly design for REL openings). 

child proof container wholesale

Plastic caps for sealing, dispensing, spraying, pumping or misting. Our caps come with a variety of liner options including pressure sensitive, heat induction, foam and more. Plastic cap styles include continuous thread plastic caps, child resistant caps, tamper evident caps, dispensing caps, lotion pumps, mist sprayers and trigger sprayers. Metal caps include standard caps, brush caps, child resistant caps, dauber caps, and inner seals.

plastic cap details

nutritional supplement containers

PE health care products are made of polyethylene (PE) as the main raw material. The pure PE resin is a milky white waxy solid powder with good moisture resistance, and oxygen and some other gases can pass through. Polyethylene (PE) is insoluble in water, and is insoluble in other solvents at normal temperature. It is slightly honored toluene, acetic acid, etc. at 70 degrees or more.According to different polymerization conditions and structural properties, it can be divided into low density high pressure polyethylene (LDPE), medium density medium pressure polyethylene (MDPE), high density low pressure polyethylene (HDPE). Among them, HDPE nutritional supplement container is more widely used. 

supplement bottle 

The physical properties of PE health care packaging bottles depend on the density of PE, which determines its basic properties such as hardness, moisture, water vapor permeability, stress cracking and transparency. When the density increases, the material becomes hard, the torsional denaturation and melting temperature increase, the permeability decreases, the high temperature resistance and low temperature resistance are good, and the resistance to stress cracking is weakened. Therefore, LDPE is less resistant to gases than HDPE and has lower tensile strength, but better toughness. Therefore, HDPE is widely used in the pharmaceutical industry for medicinal plastic bottles and health care products. LDPE is widely used as a film. package. Because PE is poisonous, it is a common material for pharmaceutical food packaging. The pharmaceutical packaging made of PE has good moisture and solvent resistance, and is not affected by strong acid and alkali, but its transparency is poor.

PET tramsparent bottle

Plastic tube for calcium tablets

Plastic tube for supplement and disgnosis like effervscent tablets, pills, calcium tablets or test strips, due to all of these need a dry environment to keep effective. So there must be a big doubt for plastic tube, then i will bring more details for all friends.

The material of plastic tube can be made of PE or PP.

calcium tablet tube

test strip vials

The PP(Polypropylene) tube:

the transparency of the PP packaging effervescent tube is better than PE

the hardness of the PP tube is better than PE

The PE(Polyethylene) tube:

PE tube is translucent mill white before is coloured

PE packaging tube has better flexible

can feel velvety when stroke the PE tube

the LDPE tube is softer than HDPE tube,and the transparency of the LDPE tube is better than HDPE tube

the HDPE is harder than LDPE

So you need choose the material according your requirements.

desiccant cap

How to print on the effervescent tube surface?

There are three printing process to print on effervescent tube surface.

The one is offset printing,

The one is screen printing 

The last one is hot-transfer printing

so you need choose the printing process according to your requirements.

84mm Effervescent Tablet Tube

         

• 
• 
• 

84mm Effervescent Tablet TubeY001

Size: Hight: 84mm Diameter:27mm

Tablet number: 10 tabs (Tablet size- Diameter:25mm;Thickness:5.75mm)

Material: PP Tube & PE cap

Cap :Spiral cap with desiccant

Desiccant Composition: Silica gel, molecular sieve or the mixture

Certificate: ISO9001:2008  DMF

PRODUCTDESCRIPTION

Xinfuda effervescent tablet tube is made of tube and desiccant cap, desiccant cap contain silica-gel desiccant. Silica-gel desiccant is the only one meet food and through FDA and healthy for human. Silica-gel desiccant can keep tablet away from moist and stay in a dry storage.

SCOPE OFAPPLICATION

Xinfuda Moisture Proof Tubes are mainly used for effervescent tablets and test strips packing.

TECHNICAL PARAMETER

How many tablets per tube? The following information is only for your reference. It depende on the tablet thickness.

Tube Reference	Tablet Reference	Tablet Number
84mm	Diameter:25mm;Thickness:5.75mm	10
96mm	Diameter:33.3mm;Thickness:6.5mm	10
99mm	Diameter:25.35mm;Thickness:5.7mm	12
133mm	Diameter:25.35mm;Thickness:5.7mm	18
144mm	Diameter:25.35mm;Thickness:5.7mm	20

Is your product troubled by the following issues?

Tablets go bad due to the moist or leakage, tablets may damage by transportation and shake.

Xinfuda has rigorous test sealing system, the way of testing the tightness of the tubes and caps:

silica gel desiccant

desiccant spiral cap

Standard experiment: Sealed negative pressure instrument, under 27Kpa, 2minutes

practical test: 40Kpa, 2minutes

Result: There’s no water in the bottle or there’s no bubbles.

The spring can prevent tablet damage, the tablet should keep some distance from the spring:

The best condition is that the tablet on the top can touch the spring with a little pressure. Then it can prevent the tablets from shaking

What is Child Resistant Cap Bottle

Child resistant cap bottle is aslo called CRC bottle, it is a necessary packaging for drug. It is safe for family who has children, especially for baby who can not distingwish anything. Children may eat tablets by mistake if open the pharma bottle.

pharma bottle with child resistant cap

Pharma bottle with child resistant cap is contain with bottle and cap. The special design is the double cover, inner cap and thread of bottleneck connected, cover and inside links,it need external force to press the cover and turn to open. Which need people push down and turn can open the bottle. It adopts advanced injection blow molding which makes even bottleneck and uniform wall thickness.

100ml child proof cap bottle

Excellent sealing and high security show the good quality. Child resistant cap is mainly used in medical and health care to prevent children eating pills or food by mistake.

plastic tube for tablets

Plastic tube with desiccant cap for tablets and pills to keep supplement effective, effervescent pills tube is an important packaging for suppleent.

effervescent packaging

Drug producers can achieve higher attention and customer loyalty thanks to photorealistic printing and a wide range of design options. Patients profit from easy handling, while manufacturers can optimize their supply chain while ensuring the highest process safety.  If a customer wants the tubes to be child-resistant, we also have a solution to offer.

effervescent tablet tube

Pain killers and other pharmaceutical agents can be easily digested and consumed in liquid form. Moreover, patients particularly appreciate the easy handling of effervescent tubes. Equipped with a convenience closure like the FOG from Sanner, the tubes remain tightly closed at all times, while the tablets are protected against light and moisture with a long shelf life. In contrast to blisters, for instance, the drugs remain inside their package, which in turn is not damaged during transport.

A compatibility test between a pharmaceutical bottle and a drug

Pharmaceutical packaging bottles are commonly used in the packaging of tablets, capsules, injections, eye drops and the like. Commonly used materials are high density polyethylene, low density polyethylene, polypropylene, polyester, and the like. Drug compatibility focuses on the penetration of water vapor, the infiltration of oxygen; the penetration of moisture and volatile drugs: the transfer of fat-soluble drugs and bacteriostatic agents to plastics: the adsorption of plastics on drugs: the role of solvents and plastics: The influence of additives in plastics, decomposition products during processing on drugs, and problems such as particles and sealing.
[caption id="" align="alignnone" width="800"] child proof packaging[/caption]
 The establishment of the compatibility test method, when inspecting the pharmaceutical packaging materials, three batches of packaging materials should be used to carry out the compatibility test on the batch of drugs to be packaged; when inspecting the drugs, three batches of drugs should be used. The compatibility test is carried out after packaging a batch of materials or containers in the package.
[caption id="" align="alignnone" width="1000"] effervescent tablet tubes[/caption]
When conducting a compatibility test between a pharmaceutical bottle and a drug, the test method can be established by referring to the quality standard of the drug and the packaging material or container.

How to choose a test strips packaging

How to determine the correctness of the test paper barrel selection, the appropriate test strips tube should have the following characteristics
First, the test strips vial is used as a storage instrument for the test paper, which plays an important role in the shelf life of the test paper. We often attach great importance to the test paper barrel sealing problem and neglect the stability problem. The stability of the test paper barrel batch and batch quality is the key to the stability of the test paper. Just like the test strips, the individual packaging is convenient, but the batch can not be controlled, the measurement results are easy to make a difference, the test paper barrel is the same, the error between the batch and batch of the good test paper barrel is minimized, which is the final result.

small test strip container
The second machine operation process is smooth. At present, most of the barreled test strips are European and American machines. Good test paper barrels have the same flow stability on different machines, reducing the production cost of single products.
The barreled test strips are currently 25 pieces/barrel of packaging on the market. Generally, they are usually used up in 2-3 months after opening. That is to say, the terminal customers are people who need long-term monitoring, that is, stable customer groups.

test strip vials
At present, the homogenization of products is serious. If you let customers remember that you recognize you, on the one hand, the bottle printing should conform to the senses of the end consumers, and on the other hand, it should be anti-counterfeiting. Every company has its own brand-building road, and the product branding will let the products speak for themselves.

Plastic tube for calcium tablets

Plastic tube for supplement and disgnosis like effervscent tablets, pills, calcium tablets or test strips, due to all of these need a dry environment to keep effective. So there must be a big doubt for plastic tube, then i will bring more details for all friends.

The material of plastic tube can be made of PE or PP.

calcium tablet tube

test strip vials

The PP(Polypropylene) tube:

the transparency of the PP packaging effervescent tube is better than PE

the hardness of the PP tube is better than PE

The PE(Polyethylene) tube:

PE tube is translucent mill white before is coloured

PE packaging tube has better flexible

can feel velvety when stroke the PE tube

the LDPE tube is softer than HDPE tube,and the transparency of the LDPE tube is better than HDPE tube

the HDPE is harder than LDPE

So you need choose the material according your requirements.

desiccant cap

How to print on the effervescent tube surface?

There are three printing process to print on effervescent tube surface.

The one is offset printing,

The one is screen printing 

The last one is hot-transfer printing

so you need choose the printing process according to your requirements.