显示标签为“hdpe medicine bottle”的博文。显示所有博文
显示标签为“hdpe medicine bottle”的博文。显示所有博文

2021年8月9日星期一

What medicines can be contained in the tablet medicine bottle

 Tablet medicine bottles are generally made of polymer materials such as polyethylene, polypropylene or polyester. This type of packaging bottle has a large mouth and a desiccant is placed inside the bottle to absorb moisture. It can not only be used as a packaging for tablet medicines, It can also contain capsules and pills.


What medicines can be contained in the tablet medicine bottle

50ml desiccant bottle


Capsules: The drugs packed in capsules are generally powders or granules that are irritating to the esophagus and gastric mucosa, or have a bad taste, are easy to volatilize, are easily broken down by saliva in the mouth, and are easily inhaled into the trachea. These medicines are packed in capsules, which not only protects the properties of the medicines from being destroyed, but also protects the digestive organs and respiratory tract.

Pills: Pills are spherical or spheroid-like preparations made of medicinal powders or medicinal material extracts plus suitable binding auxiliary materials. Classification according to the preparation method: 

①Plastic pills, such as honey pills, paste pills, concentrated pills, wax pills, etc.; 

②Pan pills, such as water pills, water honey pills, concentrated pills, paste pills, etc.; 

③Drip pills (dropping pills). Classified by excipients: water pill, honey pill, water pill, paste pill, wax pill, etc.


What medicines can be contained in the tablet medicine bottle

HDPE pill bottle


Whether it is tablets, capsules, or pills, these drugs are all solid preparations, which have high requirements on the tightness and moisture resistance of the packaging. The tablets and medicine bottles have abundant raw materials, various shapes and colors, and polymer materials can also be used. By adding additives to improve its performance, it can meet the storage requirements of capsules and pills.

2021年7月1日星期四

Performance comparison of HDPE bottles and PP bottles

 Both HDPE bottles and PP bottles are commonly used packaging for medicines. Both of these bottles can be used as packaging for solid and liquid medicines, but there are still certain differences between the two in terms of performance.


Performance comparison of HDPE bottles and PP bottles

HDPE pills bottle



1. Heat resistance: relatively speaking, polypropylene bottles have higher heat resistance and can be sterilized at temperatures above 100°C, and will not be deformed at 150°C without external force. Terminal sterilization is generally required All will choose polypropylene bottles.

2. Low temperature resistance: The brittle temperature of high-density polyethylene bottles can generally reach below -50℃, and with the increase of relative molecular weight, the lowest can reach -140℃. Therefore, if the medicine needs to be used in a low temperature environment, it is still necessary to choose a polyethylene bottle as much as possible.


Performance comparison of HDPE bottles and PP bottles

50ml desiccant bottle



3. Aging resistance: The aging resistance of PP bottles is relatively weak. In terms of structure, polypropylene has a side branch composed of methyl groups, which is easy to be oxidized and degraded under the action of ultraviolet light and heat energy.

4. Flexibility: Although polypropylene bottles have high strength, they have poor toughness, while high-density polyethylene bottles have better toughness, so this material is also widely used in pipes, stretch strips, strapping, Wire and cable sheath, etc.

The above is the difference in performance between HDPE bottles and PP bottles. Both have their own advantages and disadvantages. However, in actual applications, in order to improve the various properties of the bottle, some additives will be added to ensure that the bottle can be better. Protect the safety of medicines.

What are the characteristics of the plastic tablet bottle

 Medicine bottle is an important form of pharmaceutical packaging. According to the different dosage forms of medicine, it is divided into liquid medicine bottle and tablet medicine bottle. Today we mainly introduce several characteristics of plastic tablet medicine bottle.


What are the characteristics of the plastic tablet bottle

HDPE pill bottle



Tablet medicine bottles are mainly used to contain solid medicines such as tablets and capsules. Such preparations have good physical and chemical stability, low production and manufacturing costs, and are convenient to take and carry. But at the same time, this kind of medicine is also very afraid of moisture, and it is easy to deteriorate after being wet and cause the medicine to fail. Therefore, as a special packaging for solid medicines, the plastic tablet medicine bottle has the following characteristics:

1. Moisture resistance: In order to prevent the deterioration of solid drugs from moisture, the tablet medicine bottle needs to have good moisture resistance. The material of the bottle is generally selected from polyethylene, polypropylene and other materials that have good barrier properties to the external environment. The plastic tablets and bottles also produce a certain amount of moisture during the production process, so a desiccant is placed inside the bottle to absorb this moisture. To ensure the dryness of the drug storage environment and maintain the efficacy.

2. Convenience: In order to control the pouring dose of the liquid medicine, the bottle mouth is generally smaller, while the solid medicine is the opposite. In order to facilitate the taking of the medicine, the mouth diameter of the tablet medicine bottle is generally relatively large.

The above are the two basic characteristics of the plastic tablet medicine bottle. In addition, some medicines are easy to decompose when exposed to light. When choosing the packaging, a brown bottle is used to ensure the stability of the medicine during the validity period.

2021年6月9日星期三

Common problems of HDPE bottle blow molding

 HDPE bottles are commonly used packaging for capsules, oral liquids, tablets and other medicines. The quality of the bottle is of great significance to the efficacy of the medicine. In the process of blow molding, plastic bottles often encounter some quality problems. If these problems are controlled, the quality of the bottles will be more guaranteed.


Common problems of HDPE bottle blow molding

HDPE pill bottle



1. Some parts of the HDPE bottle will appear whitish and excessively stretched. This is due to the fact that the central temperature is too low or the pre-blowing is formed too early. This can be solved by controlling the temperature and the timing of the pre-blowing. problem.

2. There are wrinkles in the bottom of the bottle. If the bottom temperature is too high, the pre-blowing is too late, the pre-blowing pressure is too low or the flow rate is too small.

3. The bottom of the bottle is thick and thin at the top. This phenomenon is mostly caused by uneven baking or insufficient temperature at the bottom of the bottle.

4. The eccentricity of the bottom of the plastic bottle is related to the temperature of the plastic preform, stretching, pre-blowing, high-pressure blowing, etc. Reduce the temperature of the plastic preform, accelerate the stretching speed of the plastic bottle, check the gap between the tie rod head and the bottom mold, extend the pre-blowing time, and reduce the pre-blowing pressure. Or postpone high-pressure blowing to check whether the preform is eccentric.

5. High-density polyethylene bottles are also particularly prone to deformation. If the wall thickness difference between the longitudinal wall thickness position and the radial wall thickness position is too large, it is easy to deform. The shrinkage formed by the position of the parting line of blow-molded container products is more serious than that of the adjacent position, which is that the cooling rate of the thicker area is much slower than that of the surrounding area. Different cooling rates cause different shrinkage and deformation. This defect is best dealt with by controlling the longitudinal wall thickness and the radial wall thickness at the same time.

The above are the common problems in the blow molding process of HDPE bottles. According to the specific problems that arise, the corresponding solutions can be selected to ensure the quality of the bottles and better protect the safety of medicines.

2021年5月8日星期六

How to choose a manufacturer of medicinal HDPE pills bottles?

 Pharmaceuticals are necessities of people's lives. Plastic bottles for packaging capsules, powders and liquid preparations are usually called medical plastic bottles. High-density polyethylene bottles are the most widely used category. Pharmaceutical packaging material manufacturers on the market There are so many, how do pharmaceutical companies choose the right supplier?


How to choose a manufacturer of medicinal HDPE pills bottles

HDPE pills bottle



The quality of medicinal HDPE(high-density polyethylene) pills bottles is related to whether the drug can maintain good efficacy during the validity period. Choosing an excellent pharmaceutical packaging material supplier is a prerequisite for ensuring the quality of packaging. Generally speaking, manufacturers of pharmaceutical packaging need to have the following conditions and capabilities:

1. Certificate of medicine packaging material:

The certificate of pharmaceutical packaging materials is a basic requirement for a supplier of pharmaceutical packaging materials, and the number of certificates often determines the strength of the company. The certificate of pharmaceutical packaging materials refers to the "Registration Certificate for Pharmaceutical Packaging Materials." The Measures for the Administration of Pharmaceutical Packaging Materials and Containers (Interim) (Bureau Order No. 21) stipulate that "medical packaging materials must be registered by the drug regulatory authority and obtained the "Registration of Pharmaceutical Packaging Materials" It can be produced only after the certificate, and unregistered pharmaceutical packaging materials shall not be produced, sold, operated or used.

2. Clean workshop:

Medicine is a kind of special commodity, which has high hygiene requirements. As a supplier of pharmaceutical packaging, it is necessary to have a clean workshop. Only in this way can the medicinal high-density polyethylene bottles meet the hygienic standards and meet the requirements of medicinal packaging.

3. Production scale:

In addition to the certificate of pharmaceutical packaging materials and the clean workshop, the supply strength and scale of the pharmaceutical packaging material manufacturers cannot be ignored, which will determine whether the later packaging production line can operate normally and deliver on time.

Pharmaceutical companies can consider the above aspects when choosing a manufacturer of high-density polyethylene bottles for pharmaceuticals. In addition, they should also pay attention to factors such as the quality of the product itself. 

2021年4月27日星期二

Application of High Density Polyethylene Bottle in Medicine Packaging

With the continuous improvement of various production processes, HDPE raw materials are processed into various forms of high-density polyethylene bottles and used in various industries. Among many applications, pharmaceutical packaging is a relatively special field.


Application of High Density Polyethylene Bottle in Medicine Packaging

60ml HDPE pill bottle with crc



High-density polyethylene is non-toxic, odorless, feels like wax, has excellent low temperature performance, can be used in an environment of -70-100 ℃, is resistant to most acids and alkalis, has good flexibility, and is light and not fragile. . Pharmaceutical packaging is generally divided into two categories: solid and liquid. High-density polyethylene bottles can be used as packaging for solid medicines and liquid medicines. Some liquid medicines are easy to decompose when exposed to light, and will be made into brown bottles by adding color masterbatch to the raw materials to better protect the medicines. Solid medicines are easily deteriorated by moisture, so high-density polyethylene bottles used for solid medicine packaging will add a desiccant to the bottle to maintain the dryness of the environment in the bottle and protect the stability of the medicine.

HDPE pills bottle plays an important role in the safety and effectiveness of drugs. For high-density polyethylene bottles for solid and liquid pharmaceutical packaging, the industry has also formulated corresponding quality standards to determine the appearance, dissolution, drop resistance, and abnormality of the bottles. Toxicity and other indicators and testing methods have been specified in detail to ensure that the packaging quality meets the standard requirements.

High-density polyethylene bottles are currently one of the common packaging in the pharmaceutical industry. In addition, polyester bottles, polypropylene bottles and other polymer material packaging also have a certain range of applications in the field of pharmaceutical packaging. Whether there will be more innovative packaging in the future, we will wait and see.