2022年3月31日星期四

Application of Dosing Syringe in Omeprazole for Horses

Plastic dosing syringes are both a drug storage container and a drug delivery tool. It has a very common application in equine medicine, and omeprazole, which is used to treat gastric ulcer disease in horses, is used in this packaging.

Application of Dosing Syringe in Omeprazole for Horses

10ml dosing syringe


A equine stomach ulcer is an ulcer that occurs in the stomach. It is also a common digestive tract disease for horses. In adult horses, the professional name is Equine Gastric Ulcer Syndrome (EGUS). The main reason for this disease is that due to excessive stomach acid in the stomach, the epithelial mucosa of the squamous area of the stomach (ie, the upper half of the stomach) is exposed to stomach acid for a long time, leading to inflammation and erosion, and finally deep into the stomach wall and causing ulcers.


Application of Dosing Syringe in Omeprazole for Horses

30ml dial a dose syringe


Among the medicines for the treatment of equine gastric ulcers, omeprazole in the form of a paste is mostly used, which can inhibit the gastric acid that causes equine ulcers, and can also prevent equine gastric ulcer syndrome. The packaging of this drug is generally mostly dosing syringes. The packaging consists of a tube sleeve, a push rod, a piston, a protective cap, and a positioning ring. According to the weight of the horse, the dose of the drug is also different. The scale and positioning ring on the push rod can control the dose of the drug and prevent overdose.

The dosing syringe uses the pressure of the push rod for drug delivery, which can reduce the residue of the drug to a certain extent, improve the utilization rate of the drug, and reduce unnecessary waste. It is an efficient and convenient new type of packaging.

Specifications of plastic tube with lid

 VC effervescent tablet is a kind of tablet that contains a large amount of vitamin C, which can enhance the body's resistance and is used to prevent and treat various acute and chronic infectious diseases or other diseases. The dosage form of this drug is relatively large, and it is usually packaged in a special plastic tube.


Specifications of plastic tube with lid

144mm eff tab tube supplier

Specifications of plastic tube with lid

84mm effervescent tablet tube


The ingredients of VC effervescent tablets contain disintegrants, which can be disintegrated when placed in water and produce a large amount of carbon dioxide gas. It has various flavors and is very popular among young people. It has the following characteristics:

1. The dosage form is novel, easy to take, and the effect is rapid;

2. Good taste and good patient compliance, especially suitable for children, the elderly and patients who have difficulty swallowing solid preparations;

3. Rapid disintegration within 1-5min;

4. High bioavailability, can improve clinical efficacy;

5. Slightly acidic, which can increase the stability and solubility of some drugs;

6. Easy to carry, transport and store.

Depending on the taste or manufacturer, the size and thickness of the effervescent tablet form are also different, so the specifications of the packaging are also different. The bottle mouth of the plastic tube with lid is generally divided into 29mm, and the common specifications of the bottle height are 84mm, 98mm and 144mm. Except 144mm, it is used to hold 10 tablets with a thickness of about 6mm; 144mm is used to hold 20 tablets with a thickness of about 6mm. When choosing packaging, manufacturers should choose appropriate packaging according to the specifications of the tablet, so as to better protect the safety of effervescent tablets.

The plastic tube with lid is different from the ordinary tablet bottle. Its cap has a soft coil spring, which can compress the tablet and avoid the action of various external forces during transportation, which may cause the tablet to break. All in all, it is a novel and versatile package.

2022年3月30日星期三

Importance of Paxlovid moisture-proof packaging

 Drug moisture-proof packaging refers to the packaging with special moisture-proof function, which is mainly used for drugs that are very sensitive to water molecules. With the launch of new crown treatment drugs such as Pfizer's Paxlovid (Paxlovid) and Merck's Molnupiravir (Monupavir), the dawn of the new crown epidemic that has swept the world will appear. So, what important role will moisture-proof packaging play in pharmaceuticals?


Importance of Paxlovid moisture-proof packaging

50ml pharma desiccant bottle

At present, the new crown treatment drugs that have been marketed are mainly oral small-molecule drugs. The structure of small-molecule drugs has good spatial dispersion, and their chemical properties determine their good drug-forming properties and pharmacokinetic properties. These characteristics make small molecule drugs show great advantages in the drug development process and other drug fields, and the development of small molecule drugs is increasingly favored by the market. On the other hand, the dosage forms of these drugs are mostly tablets or capsules, which require very high moisture resistance of the packaging.


Importance of Paxlovid moisture-proof packaging

child proof bottle

Tablets and capsules are very easy to absorb water molecules, causing deliquescence, adhesion, etc., affecting the therapeutic effect of drugs, and even endangering the health and safety of patients. Therefore, when choosing packaging, moisture-proof function is an element that pharmaceutical companies focus on. Drug moisture-proof packaging is a package with a desiccant. The desiccant can absorb the water molecules inside the package and maintain the stability of the drug within the validity period. It has become the main packaging form of tablets and capsules.

Preventing drugs from getting wet is the basic function of drug moisture-proof packaging. With the continuous improvement of packaging design and production technology, this kind of packaging has gradually equipped with child-proof and anti-theft functions, providing more security for drugs.

2022年3月27日星期日

How does Molnupiravir bottle prevent moisture

 Molnupiravir was jointly developed by Merck and Ridgeback for the treatment of COVID-19 in patients infected with SARS-CoV-2, and has received emergency approvals in India, the United Kingdom, the United States and other places. This drug is a capsule preparation. As a special dosage form, how can its drug packaging be moisture-proof?

Capsule preparation is a capsule made of special film-forming materials (such as gelatin, cellulose, polysaccharide, etc.), into which the contents (such as powder, liquid drugs, etc.) or doses are loaded. This drug is very sensitive to water molecules, and it is easy to stick and deliquescence after being wet, which affects the efficacy of the drug. The pharmaceutical packaging used for this drug must have very good moisture resistance.

How does Molnupiravir bottle prevent moisture

50ml pharma deiccant bottle


How does Molnupiravir bottle prevent moisture

75ml child resistant bottle


Medicinal plastic bottle is a commonly used packaging method for capsule preparations. In order to prevent the drug from getting wet, a desiccant will be placed in the moisture-proof packaging of the drug, which can absorb the water molecules inside the package and maintain the stability of the internal environment. The desiccant is mainly based on silica gel and molecular sieve, or a mixture of the two in equal proportions. The silica gel desiccant can effectively control the number of water molecules for a long time. effect.

The desiccant in the moisture-proof packaging of medicines is mostly packaged in bags. With the continuous evolution of packaging, packaging with more novel functions has gradually appeared. A small medicine warehouse is designed on the bottle cap to store the desiccant, which can prevent Direct contact between the drug and the desiccant can also prevent children from accidentally eating the desiccant. This novel design of packaging also increases the added value of drugs and becomes the choice of more and more pharmaceutical companies.

2022年3月23日星期三

Molnupiravir for moisture-proof packaging of drugs two requirements

Molnupiravir is an antiviral drug that inhibits the replication of certain RNA viruses. For the treatment of COVID-19 in people infected with SARS-CoV-2. It belongs to a small molecule drug and is in the form of capsules. What are the requirements of this drug for moisture-proof packaging of drugs?


Molnupiravir for moisture-proof packaging of drugs two requirements

50ml desiccant bottle


Molnupiravir for moisture-proof packaging of drugs two requirements

40ml desiccant bottle

Molnupiravir for moisture-proof packaging of drugs two requirements

medicine cap


Capsules refer to capsules made of special film-forming materials (such as gelatin, cellulose, polysaccharides, etc.), into which the contents (such as powdered and liquid medicines, etc.) or doses are loaded for easy swallowing. Medicines in capsules are generally powders or granules that are irritating to the esophagus and gastric mucosa, or have bad taste, are easily volatile, are easily decomposed by saliva in the oral cavity, and are easily inhaled into the trachea. These medicines are packed into capsules, which not only protect the medicinal properties of the medicines from being destroyed, but also protect the digestive organs and respiratory tract. Removing the capsule shell may result in drug loss, drug waste, and reduced efficacy. In addition, some drugs need to be dissolved and absorbed in the intestine, and the capsule protects the drug from being destroyed by stomach acid.

Molnupiravir's requirements for moisture-proof packaging of pharmaceuticals are mainly moisture-proof and airtight. These drugs are very sensitive to water molecules, and are prone to adhesion and deliquescence after being exposed to moisture, and their efficacy is greatly reduced, and sometimes there are toxic and side effects. In order to maintain the stability of the internal environment of the packaging, a desiccant will be included in the moisture-proof packaging of medicines to absorb moisture. There are also strict requirements for indicators such as the water absorption rate of the desiccant. In terms of sealing, it is mainly the ability of the bottle mouth and the bottle cap to cooperate, and to ensure the accuracy of the size, in order to better ensure the good sealing of the package.

The above are the two requirements of Molnupiravir for moisture-proof packaging of drugs, which are also two very important aspects to maintain drug stability and safety. Pharmaceutical companies should pay attention when choosing packaging.

Molnupiravir for moisture-proof packaging of drugs two requirements

Molnupiravir for moisture-proof packaging of drugs two requirements

DMF List

Application of Dosing Syringe in Omeprazole for Horses

 Plastic dosing syringes are both a drug storage container and a drug delivery tool. It has a very common application in equine medicine, and omeprazole, which is used to treat gastric ulcer disease in horses, is used in this packaging.

Application of Dosing Syringe in Omeprazole for Horses

10ml dosing syringe


A equine stomach ulcer is an ulcer that occurs in the stomach. It is also a common digestive tract disease for horses. In adult horses, the professional name is Equine Gastric Ulcer Syndrome (EGUS). The main reason for this disease is that due to excessive stomach acid in the stomach, the epithelial mucosa of the squamous area of the stomach (ie, the upper half of the stomach) is exposed to stomach acid for a long time, leading to inflammation and erosion, and finally deep into the stomach wall and causing ulcers.


Application of Dosing Syringe in Omeprazole for Horses

30ml dial a dose syringe


Among the medicines for the treatment of equine gastric ulcers, omeprazole in the form of a paste is mostly used, which can inhibit the gastric acid that causes equine ulcers, and can also prevent equine gastric ulcer syndrome. The packaging of this drug is generally mostly dosing syringes. The packaging consists of a tube sleeve, a push rod, a piston, a protective cap, and a positioning ring. According to the weight of the horse, the dose of the drug is also different. The scale and positioning ring on the push rod can control the dose of the drug and prevent overdose.

The dosing syringe uses the pressure of the push rod for drug delivery, which can reduce the residue of the drug to a certain extent, improve the utilization rate of the drug, and reduce unnecessary waste. It is an efficient and convenient new type of packaging.

2022年3月15日星期二

Pet Nutritional Cream Applicator

Pet scientific feeding has become a trend. The pet nutrition cream applicator is a new type of packaging, and its special design makes scientific feeding no longer far away.

Scientific pet feeding is a macro concept. It is not only the daily diet and health of pets, but also the accuracy of drug dosage. Pet nutrition ointment is a kind of medicine that is always prepared by pet families. It has the characteristics of easy digestion and absorption, and can quickly supplement the nutrition needed by pets.


Pet Nutritional Cream Applicator

dial a dose syringe 30ml


Pet Nutritional Cream Applicator

15ml pets syringe


Some pet owners often do not pay attention to the specific dosage when feeding their pets nutritional cream, which is prone to problems such as overfeeding. The pet nutrition cream applicator is composed of a tube sleeve, a push rod, a protective cap and a positioning ring. The push rod is printed with a standard scale. Calculate the required dose before feeding, slide the positioning ring to the specified scale, and then push the push rod. The lever will stop when it reaches the positioning ring. This feeding method can well control the intake of pet drugs and realize the scientific feeding of pets on drugs.

The special design of the pet nutrition creamapplicator not only facilitates the operation of pet owners, but also accurately controls the dosage of drugs. As an important packaging form, it is also loved by many pet owners. 

Application of Rotary Medicinal Bottle Caps in Cough Syrup

 As an important part of medicinal plastic bottles, the crc caps play an important role in ensuring the stability of medicines. As people pay more attention to the safety of children, in addition to the application of this type of cover in solid drug packaging, oral liquid drugs such as cough syrup are also gradually using child resistant cap.


Application of Rotary Medicinal Bottle Caps in Cough Syrup

cap for syrup bottle


Cough syrup is mainly used to relieve cough and reduce phlegm. Suitable for colds, coughs, phlegm, bronchial asthma, etc. is a prescription drug. In the selection of cough syrup, children are easy to accept because of the sweet taste of cough syrup. It is precisely for this reason that children mistake drugs for beverages, and incidents of accidental ingestion of drugs occur one after another, endangering children's safety.


Application of Rotary Medicinal Bottle Caps in Cough Syrup

28mm child resistant cap


The crc cap is a cap with a special structure. It is composed of an inner and outer double-layer structure. The package cannot be opened only by rotating the outer cap. It must be rotated while pressing the outer cap to open. Such an opening method is difficult for children, so as to prevent children from opening the package at will and avoid accidental ingestion of drugs.

In fact, child resistant caps have long been enacted in the United States, Australia and other countries to force toxic drugs to use this packaging, which is also to better protect the safety of children. In China, many pharmaceutical companies have already chosen this kind of packaging. In conclusion, this form of lid will be a big trend in the future.


2022年3月13日星期日

Introduction to the sterilization process of veterinary vaccine bottles

 Veterinary vaccine bottles are containers used to store various animal vaccines. In order to ensure the safety of vaccines, the packaging must be sterilized before being put into use. This kind of packaging is generally sterilized by ethylene oxide, and the sterilization process is as follows:

Introduction to the sterilization process of veterinary vaccine bottles

50ml pp vaccine bottle

Introduction to the sterilization process of veterinary vaccine bottles

250ml vaccine bottle


1. The ethylene oxide sterilization procedure should include preheating, pre-wetting, vacuuming, feeding gasified ethylene oxide to reach a predetermined concentration, maintaining sterilization time, removing ethylene oxide gas in the sterilizer, analyzing and Remove ethylene oxide residues from veterinary vaccine vials.

2. 100% pure ethylene oxide or mixed gas of ethylene oxide and carbon dioxide can be used for ethylene oxide sterilization. Freon is prohibited.

3. The analysis can be continued in an ethylene oxide sterilizer, or it can be placed in a special fume hood, and natural ventilation should not be used. The repeatedly input air should be filtered with high efficiency, which can filter out more than 99.6% of particles ≥0.3um.

4. Residues of ethylene oxide mainly refer to ethylene oxide and its two by-products, chloroethanol ethane and ethylene glycol ethane, left in articles and packaging materials after ethylene oxide sterilization; Residual ethane can cause burns and irritation to the patient.

The above is an introduction to the sterilization process of veterinary vaccine bottles. After the sterilization is completed, the packaging can enter the next step of use, which better protects the stability and safety of the vaccine within the validity period.

COP vials can be used for the packaging of cell therapy products

 With the rapid development of cytology, immunology, molecular biology and other technologies, cell therapy, as a safe and effective treatment method, plays an increasingly prominent role in clinical treatment. The COP vial, which is a high value-added drug packaging, will also become the mainstream packaging of cell therapy products with the development of the industry.


COP vials can be used for the packaging of cell therapy products

5ml COP vial


COP vials can be used for the packaging of cell therapy products

COP vials can be used for the packaging of cell therapy products

DMF list


Cell therapy products refer to products that treat or prevent diseases after infusion of human autologous or allogeneic cells in vitro. Behavioral treatment, the treated cells in cell therapy products play a primary role in the treatment or prevention of disease.

According to Clinical Trials data, as of the third quarter of 2020, there were a total of 1,103 CAR-T clinical trials in the world, of which the number of CAR-T clinical trials in China and the United States exceeded 70% of the global total. At present, the field of cell therapy products in my country presents a two-way policy orientation of "encouragement + regulation". The State Food and Drug Administration (CFDA) issued the "Technical Guiding Principles for Research and Evaluation of Cell Therapy Products" in December 2017. Under a series of policies such as the national comprehensive reform pilot, Shenzhen is actively exploring cell legislation to regulate and Promote the benign and steady development of Shenzhen's cell therapy industry.

Cell therapy products are high value-added drugs and have higher requirements on packaging, such as low-temperature storage, low protein adsorption, transparency, etc. As a new type of packaging material, COP can fully meet the characteristics of cell therapy products. become the main choice for this type of drug packaging.

On the whole, cell therapy products will enter the fast lane of development under the environment of market demand and national policy support, and the market demand for COP bottles will also continue to increase with the development of the industry.


2022年3月10日星期四

What do the numbers at the bottom of the effervescent tube mean

 Effervescent tubes are the main packaging for VC effervescent tablets, candy pressed tablets and other tablets. Sometimes we will develop a number on the bottom of the bottle and a triangle formed by three arrows. What does this mean?


What do the numbers at the bottom of the effervescent tube mean

84mm effervescent tabket tube

The American Plastics Industry Association has developed a code for the types of plastics used in plastic products. It is in the middle of the triangle formed by three arrows representing the cycle, plus a number sign. They attach the triangular recycling mark to plastic products and use the number 1. To 7 and English abbreviations to refer to the types of resins used in plastics. The bottom of the effervescent tube is generally the number 2 or 5, which means the following:

01 Polyester: such as: mineral water bottles, carbonated beverage bottles, beverage bottles, it is recommended not to recycle hot water

02 High-density polyethylene: such as cleaning supplies and bath products, it is recommended not to clean thoroughly and not to recycle

03 Polyvinyl chloride: such as some decorative materials, it is recommended that if you use it again, do not let it be heated.

04 Low-density polyethylene: such as cling film, plastic film, etc., it is recommended not to wrap the cling film on the surface of the food and put it in the microwave oven

05 Polypropylene: can withstand temperatures above 100 degrees, such as: microwave lunch boxes

06 Polystyrene: heat resistance 60-70 degrees, hot beverages will produce toxins, and styrene will be released when burned, such as: bowls of instant noodle boxes, fast food boxes

07 Other plastic codes: such as water bottles, drinking glasses, feeding bottles

The above are the different meanings represented by the numbers at the bottom of different bottles. The bottom of the effervescent tube will generally be marked with the HDPE or PP logo, indicating the material of the packaging.

What do the numbers at the bottom of the effervescent tube mean

What do the numbers at the bottom of the effervescent tube mean

DMF

Features of Equine Deworming Syringes

 With the development of equestrian sports, everyone began to realize the necessity of deworming. Most of the horse deworming drugs are ivermectin, which is mostly in the form of paste, and the packaging is mainly plastic syringes. As an efficient packaging form, what are the characteristics of this packaging?


Features of Equine Deworming Syringes

dial a dose syringe


The plastic paste syringe is composed of a tube sleeve, a push rod, a piston, a protective cap, and a positioning ring. It is not only a packaging container, but also a drug delivery tool. The cap fits snugly on the tip, allowing the package to have a good seal. Remove the cap, push the push rod, and it becomes a drug delivery tool again.
Compared with other packaging, this kind of packaging is used for drug delivery through the driving force of the push rod, which can reduce drug residues and improve the utilization rate of drugs. Due to the difference in horse weight, the requirements for the dosage of the drug are also different. There is a scale printed on the push rod of the package, and used together with the positioning ring, the dosage of medicine can be accurately controlled, and the health of horses can be avoided due to overdose or underdose.
On the whole, the plastic paste syringe is easy to use, reduces pollution, and can control the dose of medication through the positioning ring. It is an efficient, convenient and very functional package. It has also been used in pet nutrition cream, cow endometritis medicine, cow mastitis medicine, cockroach medicine and many other medicines.

2022年3月8日星期二

Use of antibiotics in dairy cows

 Residue benchmarks for veterinary antibiotics in milk

The benchmark for residue studies used by us to establish a withdrawal period for a veterinary antibiotic is the so-called maximum residue limit [MRL] set by the European Commission and applicable throughout the European Union. This benchmark is used by government residue testing laboratories for testing samples submitted in accordance with the national residue plan. However, the MRLs for specific drugs are not necessarily identical to the test standards used by creameries to test milk for freedom from inhibitory substances, including antibiotics.  The effect of this means that farmers supplying milk to creameries might need to observe additional precautions in order to ensure that they meet the creamery standards for milk delivery.


Residue testing in Ireland

Residue testing of milk, honey, eggs and meat is carried out in accordance with the national residue plan. The Department of Agriculture, Food and the Marine, acting with the Food Safety Authority, regulates this activity. The benchmark used for testing is the so-called Maximum Residue Limit (MRL).  MRLs are established for each drug or drug class used in a veterinary medicine.  In the EU, they are elaborated by the European Medicines Agency, following a d etailed scientific review of the toxicology of the drug, as well as an analysis of the absorption, distribution, metabolism and elimination of the drug from treated animals. The same approach is followed internationally in establishing MRLs, which are the basis of internationally-accepted trade standards for drug residues. The MRLs set by the world body, Codex Alimentarius, are taken into consideration when establishing MRLs for the European Union.  HPRA personnel are involved in setting the MRLs under the aegis of the EMA. These MRLs are subsequently adopted by the European Commission and become legal limits which are widely recognised as protecting public health. These limits are updated and published by the EU Commission on a regular basis, for further information please click here. Once adopted in the EU, HPRA is allowed to authorise veterinary medicines containing the substances concerned, on foot of an application from an animal health company.


The benchmark used by the HPRA to evaluate withdrawal periods for veterinary medicines is the MRLs in force in the EU. The applicant companies (known as marketing authorisation holders) for products intended for use in food-producing species are obliged to conduct residue studies on treated animals under specified dosage conditions and to provide us with these data as part of their application for marketing authorisation. The HPRA evaluates the data from these studies against the MRLs specified for the drugs in question. Using the approach specified by the EMA, we establish a withdrawal period for each product on the basis of how long it takes for residues to deplete to concentrations below the applicable MRL values.


These standards are not necessarily the same as those used by creameries and milk processors (who might use tests that are more sensitive to some drugs or less sensitive to others, depending on the precise drug in the veterinary medicine used). In particular, antibiotic screening tests used by creameries are not calibrated to be precisely in line with the MRLs for all authorised veterinary antibiotics; these tests may be exquisitely sensitive for certain classes of antibiotics (e.g. penicillins and cephalosporins) while being less sensitive to other drugs. This could result in a farmer presenting milk from a treated animal to a creamery or milk processor at a time point where the milk would fail the routine screening test being used, even though the farmer has followed the withdrawal period stated on the product labelling.

Creameries and milk processors set out their requirements for milk quality in their contracts with farmers who supply them with milk (the standards applied are expected to be based on customer requirements). These standards generally include specifications for the composition of the milk itself (e.g. percent protein, fat etc.) as well as other parameters (e.g. somatic cell count specifications) and residue specifications (e.g. milk must pass the test being used). HPRA is not involved and does not have a role in setting the commercial contracts for milk supply between farmers and their milk purchasers.

These withdrawal periods:

Are invalid if a lower residue limit is applied for testing milk,

Are invalid if the veterinary drug is used at a higher dosage than that specified,

Are subject to revision (infrequently), based on new studies being conducted or changes to the MRL value over time,

Might not be long enough, where different veterinary medicines are used concomitantly or within a short period of time to treat the same animal.


Actions to be taken

We would like to recommend the following precautionary measures to farmers and their health-care professions who are involved in supplying milk to creameries:

Farmers should continue to be vigilant regarding the use of veterinary medicines in general and antibiotics in particular in order to avoid unwanted residues.

Farmers should follow the directions of use stated on the product labeling and package leaflet unless directed otherwise by their veterinary practitioner in order to respect the MRLs set in the European Union. However, these withdrawal periods may not be sufficient to meet more demanding tests being operated at creamery level.

Creameries operating residue standards that are not aligned to European MRLs should clearly communicate those standards to farmers and their veterinary practitioners.

An increase to the stated withdrawal period might be necessary where the creamery standard is more sensitive than the MRL established in the European Union.

Faced with a problem of a residue violation having used the medicine as recommended, users of veterinary medicines should discuss the matter with their veterinary practitioner who should report the issue either to the company concerned (i.e. the marketing authorisation holder of the product concerned) or to the HPRA. We will treat the matter as a suspected adverse reaction and follow up accordingly.


Use of antibiotics in dairy cows

5ml syringe for cow mastitis


Source from HPRA

Test standard of desiccant cap

 Test standard of desiccant cap

effervescent tube caps


The following is the test standard for pharmaceutical desiccant caps:

1. Appearance

According to the quality requirements of plastic products, combined with the actual sample description, in line with the purpose of fully reflecting the quality of the product.

2. Identification

In order to effectively control the quality of the product and strengthen the monitoring of the formula and set the project, we refer to the YBB00172004-2015 method, select the infrared spectrum and density test, the index is consistent with YBB00112002-2015

3. Residue on ignition

The purpose of this test is to control the inorganic impurities in the plastic. We followed the 0.1% standard for YBB00172004-2015 and the 3.0% standard for the cover with sunscreen.

4. Desiccant Moisture Content Desiccant is a highly absorbent material that may absorb water during production. In order to ensure the quality of the product, it is necessary to control the moisture content of the desiccant to ensure the quality of the product before use.

5. Saturating agent saturated moisture absorption rate 

The desiccant capacity of the desiccant is an important indicator to check the quality of the desiccant. The saturated moisture absorption rate of different desiccants is different. To achieve the saturation of moisture absorption, it is taken out to constant weight after 8 days.

6. Short-term moisture absorption rate of desiccant

The short-term moisture absorption capacity of desiccant is also an important indicator to examine the quality of desiccant, simulating the hygroscopicity of the product during use.

7. Drop resistance

This product is a combination and should consider the combined performance of the product.

8. Physical and chemical properties of cardboard

According to the requirements of YBB00172004-2015, the physical and chemical indicators of cardboard have been established.

9. Dissolution test

Easy Oxide This item is designed to control the impurities in the water-soluble extract of the product that may affect the safety and effectiveness of the drug. Method YBB00172004-2015, the indicator is still no more than 1.0ml.

Heavy metals To control the total amount of heavy metals, set this item. . The method of the Pharmacopoeia of the People's Republic of China is adopted, and the indicator is one in a million

Non-volatile methods and indicators are fully based on the requirements of YBB00172004-2015.

10. Microbiological limits The method of the Pharmacopoeia of the People's Republic of China shall be adopted and shall comply with the regulations.

11. Abnormal toxicity The method of the Pharmacopoeia of the People's Republic of China is adopted and should comply with the regulations.


Test standard of desiccant cap

desiccant cap

2022年3月7日星期一

Two common materials for pet vaccine bottles

 To keep pets healthy, they need to be vaccinated on a regular basis. The pet vaccine bottle is a special container for storing vaccines, so what material is it generally made of?


Two common materials for pet vaccine bottles

50ml PP vaccine vial

Two common materials for pet vaccine bottles

100ml PP transparent vial

According to the different preparation processes of pet vaccines, it can be divided into inactivated vaccines and attenuated live vaccines. Inactivated vaccines are mainly made by culturing the virus on the cell matrix, and then using physical or chemical methods to kill the infectious virus but keep it at the same time. The integrity of its antigen particles makes it lose its pathogenicity and retain its antigenicity. It has the characteristics of safety, no anti-ancestry, and no return to strength. It is relatively common in pets, and it is easier to be made into multiple vaccines to prevent multiple infectious diseases.

In terms of packaging material, inactivated pet vaccine bottles are mainly made of polyethylene or polypropylene. Both materials have good corrosion resistance and can withstand the corrosion of most acid and alkali solvents at room temperature. , and light weight, not fragile, easy to transport, is also a common raw material for veterinary plastic bottle packaging. The difference is that the transparency of polypropylene raw materials is higher than that of polyethylene, and it has good high temperature resistance, while the toughness of polyethylene is better than that of polypropylene.

In general, polypropylene and polyethylene are common raw materials for pet vaccine bottles, and pharmaceutical companies can choose appropriate raw materials according to their own product needs.

Three types of drugs for tablet vials

 Tablet bottle refers to a plastic bottle made of polyethylene, polypropylene or polyester and other polymer materials, after adding organic solvent, through injection molding, injection blowing and other processes. This kind of packaging has the characteristics of light weight, not easy to break, and easy to transport. It is mainly suitable for containing three types of drugs: tablets, capsules, and pills.


Three types of drugs for tablet vials

50ml pharma bottle with desiccant cap

Three types of drugs for tablet vials

child proof bottle

Tablets: Tablets are solid preparations in the form of flakes or special-shaped flakes that are uniformly mixed with drugs and excipients and compressed. Tablets are mainly oral ordinary tablets, but also include lozenges, sublingual tablets, oral patches, chewable tablets, dispersible tablets, effervescent tablets, vaginal tablets, immediate-release or sustained-release or controlled-release tablets and enteric-coated tablets. This kind of medicine has high requirements on the moisture resistance of the tablet bottle, and a desiccant is generally placed inside the package to absorb moisture.

Capsules: Medicines in capsules are generally powders or granules that are irritating to the esophagus and gastric mucosa, or have bad taste, are easily volatile, are easily decomposed by saliva in the mouth, and are easily inhaled into the trachea. These medicines are packed into capsules, which not only protect the medicinal properties of the medicines from being destroyed, but also protect the digestive organs and respiratory tract.

Pills: Pills refer to spherical or quasi-spherical preparations made from fine powder of medicinal materials or medicinal material extracts plus suitable binding auxiliary materials.

The above are the three main types of medicines for tablet medicine bottles. Depending on the characteristics of the medicines, the bottles will have different functions. For example, for medicines that are sensitive to light, color masterbatches are generally added to the raw materials to make brown bottles for better ensure the stability of the drug.